Clark Synthesis TST429 Manual de instalación - Página 6

Navegue en línea o descargue pdf Manual de instalación para Transductor Clark Synthesis TST429. Clark Synthesis TST429 20 páginas. Platinum, gold, silver and all weather transducers
También para Clark Synthesis TST429: Manual complementario (4 páginas), Manual de instalación (8 páginas), Manual de instalación (1 páginas), Manual del comprador (2 páginas), Manual de instalación (20 páginas), Especificación (1 páginas)

Imprimir página
Clark Synthesis TST429 Manual de instalación

Installation: Overview

Installation Type: Unimount Bracket
Screws into the bottom of the mounting surface.
Requires access only to the bottom of the mounting
surface. Requires a flat or nearly flat mounting
surface.
Minimum 4-1/2" vertical space required,
including 1/2" clearance between the
Transducer and the floor.
3/4"-thick
mounting
surface
Unimount
Bracket
Flat Washer
Lock Washer
Screw
Jam Nut (up)
Transducer Lead Wire
Tactile Sound Transducers
6
NEVER TIGHTEN
BY TURNING THE
Transducer. MAKE
SURE TO TIGHTEN
THE JAM NUT
AGAINST THE
Transducer'S BRASS
NUT
3/8"-16
Threaded Stud
Jam Nut (down)
Washers
Screw
Jam Nuts
Installation Type: Hanger Bolt
Screws into the bottom of the mounting surface
(into a 5/16" drilled hole). Requires access only to
the bottom of the mounting surface.
Minimum 3-1/2" vertical space required,
including 1/2" clearance between the
Transducer and the floor.
Minimum
3/4"-thick
Transducer Lead Wire
Tip: Tighten
two jam nuts
against each
other to screw in
hanger bolt using
wrench.
Joist
(edge view)
Drill 5/16" hole
3/8"-16
Hanger Bolt
Jam Nut (down)
Jam Nut
www.clarksynthesis.com