Clark Synthesis TACTILE SOUND AQ339 Aquasonic Manual de instalación - Página 13

Navegue en línea o descargue pdf Manual de instalación para Altavoces Clark Synthesis TACTILE SOUND AQ339 Aquasonic. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20 páginas. Underwater speaker
También para Clark Synthesis TACTILE SOUND AQ339 Aquasonic: Manual complementario (4 páginas), Especificaciones (1 páginas), Lista de piezas (1 páginas), Manual del usuario (1 páginas), Hoja de referencia (1 páginas), Manual de instalación (12 páginas), Manual de instalación (3 páginas), Especificación (1 páginas)

Imprimir página
Clark Synthesis TACTILE SOUND AQ339 Aquasonic Manual de instalación

STAINLESS STEEL SCREEN INSTALLATION

Carefully remove the rubber
1
ring from face ring screw.
Save the rubber ring.
Place the bottom of the screen
4
into the face ring aligning the
feet around the tab. Note that
the smooth beveled side of the
screen should face outward
toward the front of the face
ring.
www.clarksynthesis.com
Remove the screw from the
2
face ring. Save the screw.
Push the screen all the way
5
into the face ring. You may
need to flex the screen in a
little to ensure a secure fit.
Carefully place the rubber
7
ring onto the face ring
screw.
Put on a pair of work gloves
3
to avoid being cut by the
screen's sharp edges.
Insert the screw through the
6
face ring. There is a small
hole cut out for the screw in
the screen.
Diluvio
Underwater Speaker
™
13