Clark Synthesis TACTILE SOUND AW339 Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Amplificador Clark Synthesis TACTILE SOUND AW339. Clark Synthesis TACTILE SOUND AW339 20 páginas. All-weather transducer
También para Clark Synthesis TACTILE SOUND AW339: Manual complementario (4 páginas), Ficha de datos (1 páginas), Manual de instalación (8 páginas), Manual de instalación (2 páginas), Manual del comprador (2 páginas), Hoja de especificaciones (1 páginas)

Installation: Chairs & Couches

As a general rule, most chairs and couches have an

underlying wooden frame. The Transducer can be

mounted directly to a frame member or to a hardwood

bridge that is rigidly secured to chair or couch's bottom

frame. The bridge should be at least 3/4" thick and cut

to span the two frame members or connect two sides

of a box frame. The more centrally located the frame

member or bridge is on the overall structure, the better

the distribution of tactile sound.

For best results, the Transducer should be parallel to the

ground (horizontal) so that the motion is up and down as

opposed to sideways. The Transducer can be mounted

to either the top or bottom of the bridge. When attaching

the Transducer to the top of the bridge, be sure that the

Transducer and the wiring does not interfere with any

recliner mechanism. When attaching the Transducer

to the bottom of the bridge, be sure that the Transducer

does not touch the floor.

A chair or couch with armrests is preferred since a

significant amount of tactile sensation is felt in the hands

and arms.

Tactile Sound Transducers

Hardwood Bridge (min. 3/4" thick)

Transducer mounted

under the bridge

Transducer mounted

over the bridge