Caliber HFG 509BTN Manual - Página 13

Navegue en línea o descargue pdf Manual para Altavoces Caliber HFG 509BTN. Caliber HFG 509BTN 17 páginas.

OPERATING THE SPEAKER IN AUX-IN MODE

Press the

2. Connect an audio cable to the headphone or line-out jack of an audio

device and plug the other end into the Aux -in jack located on back of

the main unit, it will access to AUX-IN mode automatically, the Pilot

lamp changes to Green color

3. Turn audio device on and play this device.

4. Press the + / - button on the speaker or on the remote to raise/lower

the volume level, When finished, press the

the main unit. Remember to turn off the speakers and your audio

device, too.

Notes:

1). If you're connected to the Line out Jack of your external device, then

you only need to adjust the volume control of this speaker. If you're

connected to the Headphone Jack of your external device, then you may

need to adjust both the volume control of your external device and the

volume control of this unit to find the most desirable volume setting.

2). During AUX mode, if you plug a USB device into the unit, the play

mode will automatically change to USB mode.

power button to turn on the unit.

power button to turn off