aldes MR Modulo Manual - Página 8

Navegue en línea o descargue pdf Manual para Controlador aldes MR Modulo. aldes MR Modulo 16 páginas. Constant airflow regulator mr

Constant Airflow Regulator MR

MR Mono - MR Modulo

INSTALLATION

• The MR will push-fit into circular ducts in close proximity to a take-off or a terminal.

• It is important to observe the MR orientation corresponding to the airflow direction indicated on the MR.

• Horizontal / vertical mounting possible.

• In order to avoid acoustic and aeraulic disturbance it is recommended to respect the following distance between the MR and the terminal

(grille / diffuser / inlet):

- in exhaust: D = 1 Ø,

- in supply: D = 3 Ø.

Air exhaust

MR Modulo mounting and setting

1. Adujst the airflow setting

Rotate the adjustment ring for a tool-free airflow setting until the desired airflow according to the correlation table.

2. Position the MR Modulo

Introduce the MR in the duct according to the arrow which shows

the airflow direction. Minimum straight upstream and downstream

distances must be observed. There is no recommendation regarding

the membane positioning.

Small diameters

Air supply

360°

3. Product localization

MR Modulo is delivered with a sticker which will be needed to be

manually filled on site (MR diameter and airflow setting) and placed

directly onto the duct to show where the MR Modulo has been

mounted.

Big diameters