Clark-Reliance Jerguson LumaStar EPL-316 Manual de instrucciones de instalación, funcionamiento y mantenimiento - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de instalación, funcionamiento y mantenimiento para Luz de trabajo Clark-Reliance Jerguson LumaStar EPL-316. Clark-Reliance Jerguson LumaStar EPL-316 12 páginas.
También para Clark-Reliance Jerguson LumaStar EPL-316: Manual de instrucciones de instalación, funcionamiento y mantenimiento (12 páginas)
Imprimir página
Figure 4
Figure 5
Step 3: While holding the top bracket in place, grab the thumb nut end of the cable, wrap around entire gauge and thread
onto the stud until the bracket is secure. When wrapping the cable around the gauge, make sure to feed the cable above the
bolt as shown above in Figure 5. Snug the cable and secure the thumb nut, but do not fully tighten the thumb nut at this
time.
Figure 6
nd
Step 4: Align bottom bracket, using the 2
bolt if possible. Wrap thumb nut end of the cable around the entire gauge and
begin to thread. Pull the cable loop as tight as possible and fully tighten the thumb nut down as shown in Figure 6. The
lower bracket should now be tight and secure.
16633 Foltz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828
www.clark-reliance.com ● [email protected]