Clarke 7614052 Manual de instrucciones de uso y mantenimiento - Página 9
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramienta eléctrica Clarke 7614052. Clarke 7614052 17 páginas. 20 tonne hydraulic press
Imprimir página
MAINTENANCE
ROUTINELY
A visual inspection must be made before use of the press, checking for leaking
hydraulic fluid and damaged, loose, or missing parts.
Owners and/or users should be aware that repair of this equipment requires
specialised knowledge and facilities. It is recommended that a routine
inspection of the press be made and any defective parts be replaced with
genuine CLARKE parts.
If thepress appears to be damaged in any way, is found to be badly worn or
operates abnormally SHOULD BE REMOVED FROM SERVICE until the necessary
repairs are made.
If the press is not to be used for any length of time, store it with the ram piston
withdrawn to protect the moving parts.
PERIODICALLY
Periodically check the press frame to make sure all bolts are tight and inspect
for cracked welds, bent, loose or missing parts. If corrosion is found it should be
removed completely and the paint restored.
Check the hydraulic jack for leaks. Replace or properly repair any damaged
or leaking hydraulic components before using. In the event of leaking seals, oil
can be topped up via the plug on the jack. Oil should be level with the
bottom of the hole. If necessary top up with CLARKE hydraulic oil, Part No.
3050830. This task is carried out with the ram fully retracted.
In the event of leakage, oil can be topped up by removing the filler plug on
the reservoir and topping up level with the plug.
DISPOSAL OF UNWANTED MATERIALS
One of the most damaging sources of environmental pollution is oil products.
Never throw away used oil with domestic refuse or flush it down a sink or drain.
Collect any oil in a leak proof container and take it to your local waste
disposal site.
Should hydraulic components become completely unserviceable and require
disposal, draw off the oil into an approved container and dispose of the
product and the oil according to local regulations.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9