Clarke CBS43 Manual de instrucciones de uso y mantenimiento - Página 6
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramienta eléctrica Clarke CBS43. Clarke CBS43 8 páginas. Drill bit sharpener
Imprimir página
MAINTENANCE
CHANGING THE GRINDING WHEEL
• Replacement grinding stones are available from the Clarke Spares
department. Part number: CBS4301
1. Remove the drill bit sharpener from the drill.
2. Remove the two screws that hold
the head assembly in place and
remove the head assembly.
3. Remove the wheel assembly.
• Make sure the spring
underneath stays in place.
4. Unscrew the adjustment cylinder
from the wheel base by turning
clockwise.
5. Prise out the washer.
6. Pop out the wheel base and
remove the worn grinding wheel.
7. Press new grinding wheel onto the
wheel base, replace the washer,
and screw the adjustment
cylinder back in.
8. Replace wheel assembly onto the
drill bit sharpener.
• Make sure that the inner flats of
the adjustment cylinder line up
with the outer flats of the drive
spindle.
9. Replace the head assembly and
screws.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6