ALDON Easy-Slide 4020-13 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Herramientas ALDON Easy-Slide 4020-13. ALDON Easy-Slide 4020-13 4 páginas. Box car door opener

Imprimir página

1. Fits Standard Fork Blades: Width 5", Thickness 2", Length 48". (Custom

sizes are available.) Center fork blades together and lock one blade, then

adjust second fork blade to fit fork tube. Do not force EASY-SLIDE® fork

tubes onto wider blades.

2. Use chain provided to secure EASY-SLIDE® frame to forklift mast. Take up

slack and hook chain securely.

3. Do not use EASY-SLIDE® where gap between dock edge and side of car

exceeds 60-inches.

4. Keep forklift at a safe distance from edge of dock at all times.

5. Unlock car door before using EASY-SLIDE®. Always release plug doors so

doors can travel to right or left.

6. Attach pincer hook to pull-tab on car door. Use caution when hooking to

other access points on door.

7. Be aware which way the door is to open or close before starting to pull.

8. Never ram the car door with pivot arm. Always pull the door using the

hook.

9. Direction of force applied by pivot arm must parallel to car door travel.

10. NEVER PULL perpendicular to car door or at an angle greater than

45 degrees, to avoid pulling door off its tracks.

11. Stop pulling when door is fully open or closed. Do not run door off the

end of its track.

12. Forklift operator must keep door in sight at all times when using

EASY-SLIDE®.

13. If door will not open using reasonable force, investigate reason.

Aldon

Easy-Slide

USER INSTRUCTIONS

Box Car Opener #4020-13