Clarke CPSB200B Manual de instrucciones de uso y mantenimiento - Página 7
Navegue en línea o descargue pdf Manual de instrucciones de uso y mantenimiento para Herramienta eléctrica Clarke CPSB200B. Clarke CPSB200B 17 páginas. Pressurised sandblaster
Imprimir página
3. Connect the sandblasting gun to
the other end of the hose in a
similar manner. Ensure the inlet
connector is tightly fitted to the
gun.
• A spare gun closing block is
supplied for future use.
OPERATION
WARNING: ALWAYS WEAR YOUR HOOD, DUST MASK AND HEAVY DUTY
CANVAS GLOVES WHEN OPERATING THE SANDBLASTER.
WARNING: BEFORE OPERATING YOUR SANDBLASTER, INSPECT EACH
CONNECTION, DOUBLE CHECKING TO MAKE SURE THAT ALL ARE TIGHT
AND PROPERLY SEALED.
WARNING: THIS SANDBLASTER IS NOT INTENDED FOR USE WITH SILICA
BASED ABRASIVES. WHICH HAVE BEEN LINKED TO SEVERE RESPIRATORY
DISEASE. ALWAYS USE SILICA SUBSTITUTES (SUCH AS CLARKE GLASS BEAD
ABRASIVE.
SAFETY AND HEALTH CONSIDERATIONS
• Before opening tank make sure that it is not pressurized. Ensure the
gauge reads "0". If it does not, release pressure from the tank (See
page 10).
• Disconnect the compressor before opening the tank. Protect
yourself and those around you from "over-spray". Remember that
your sandblaster is shooting a powerful spray of abrasive material.
Do not point it at yourself or anyone around you.
• Wear protective clothing including hood (30), and heavy gloves
when using this sandblaster.
• Wear a dust mask over your mouth and nose when using this
sandblaster. You will create a cloud of abrasive material and debris
which is dangerous to inhale.
• Protect anything around you that may be damaged from the spray
of abrasive particles. Nothing subject to contamination damage or
with a fine surface should be near your sandblaster work area.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Fig 8
7