Clarke ECSS-1 Manual de montaje e instrucciones - Página 9

Navegue en línea o descargue pdf Manual de montaje e instrucciones para Herramienta eléctrica Clarke ECSS-1. Clarke ECSS-1 16 páginas. Chainsaw sharpener

Imprimir página

Clarke ECSS-1 Manual de montaje e instrucciones

SWITCHING ON/OFF

6. To switch on, set the ON/OFF

switch to the ( I ) position. see Fig

7. To switch off, set the ON/OFF

switch to the ( O ) position. see

Fig 10

SHARPENING THE CHAIN

8. Make sure the chainsaw chain is

held securly between both guide

boards (M). Tighten with the

fastening screw (F) if nessecery.

see Fig 11.

9. Position the tooth being

sharpened near to the grinding

disc.

10. Put the adjustment wedge (G)

down into position (fig 12) and

move the tooth forward with the

adjusting screw(I) until the

bottom of the grinding disc (E)

can be positioned inside the

cutting edge of the tooth. See Fig

13.

•

Before moving the chain to the

next tooth, switch the unit off

and wait until the grinding disc

comes to a complete stop.

• First sharpen all teeth in one

direction i. e. every second

tooth.

• Then change the sharpening

angle to the opposite

direction.

• Make sure that all teeth are

sharpened as evenly as

possible.

• Only sharpen the teeth, never the chain links.

Fig 10

Fig 11

Fig 12

Fig 13