Directed Directechs DB3 Manual de instalación - Página 8

Imprimir página

Directed Directechs DB3 Manual de instalación

Vehicle connections

The connection information listed below is specific to the 2017 Ford Transit. Refer to "Pre-installation and application warnings" for a list of important notes.

Data 14-pin blue connector (H1)

Module

Conn./Pin

Color

H1/1

Light Green

H1/2

Violet/Yellow

H1/3

Tan/Black

H1/4

Tan

H1/5

Orange/Green

H1/6

Orange/Brown

H1/7

Brown

H1/8

Yellow

H1/9

Orange/Yellow

H1/10

Orange/Red

H1/11

Yellow/Red

H1/12

Brown/Red

H1/13

Red

H1/14

Black

Output 12-pin red connector (H2)

Module

Conn./Pin

Color

H2/1

Black/White

H2/2

Green/Black

H2/3

Green/White

H2/4

Red/Black

H2/5

Violet/White

H2/6

Gray

H2/7

Gray/Black

H2/8

Violet/Green

H2/9

Violet/Brown

H2/10

Yellow/Black

H2/11

Orange/Black

H2/12

Blue/Red

403.FORD13 1.12 2017 Ford Transit

Description

No Connection

(DATA) HS CAN 1 High

(DATA) HS CAN 1 Low

(DATA) HS CAN 2 High

(DATA) HS CAN 2 Low

Relay N.O. - (+) 12 Volt

[3]

Relay COM. - (+) Ignition Output

Relay N.C. - No Connection

Relay N.C. - RAP Off Interrupt (conn. side)

Relay COM. - RAP Off Interrupt (vehicle side)

Relay N.O. - No Connection

(+) W2W Only - 12 Volt

(-) W2W Only - Ground

Description

No Connection

(-) Lock Output

(-) W2W Only - Door / Trunk Output

(-) Unlock Output

[2]

(AC) W2W Only - Tach Output

(+) W2W Only - Brake Output

(+) Accessory/Keysense Output

No Connection

(Data) TX

(Data) RX

(-) W2W Only - Hood Output

Connects To

Wire Location

No Connection

OBD-Data Link Connector, white 16 pin plug, pin 6

OBD-Data Link Connector, white 16 pin plug, pin 14

OBD-Data Link Connector, white 16 pin plug, pin 3

OBD-Data Link Connector, white 16 pin plug, pin 11

BCM-Dash Fuse Box, black 2 pin plug (A), pin 1

Ignition Switch, black 7 pin plug, pin 1

Must use a1A diode.

Cut the vehicle's ignition wire and place the diode inline as shown. Only when

installing a remote starter and alarm combo system.

No Connection

BCM-Dash Fuse Box, brown 76 pin plug (C), pin 44

No Connection

BCM-Dash Fuse Box, black 2 pin plug (A), pin 1

Connects To

Wire Location

No Connection

BCM-Dash Fuse Box, brown 76 pin plug (C), pin 25

Remote Starter

BCM-Dash Fuse Box, brown 76 pin plug (C), pin 56

Remote Starter

Must use (2) 1A diodes.

Ignition Switch, black 7 pin plug, pin 6

Ignition Switch, black 7 pin plug, pin 5

No Connection

PATS Transceiver on ignition switch, black 4 pin plug, pin 3

PATS Transceiver on ignition switch, black 4 pin plug, pin 4

Remote Starter

(+/-)

Wire Color

Data

White/Blue (HS CAN)

Data

White (HS CAN)

Data

Gray/Orange (MS CAN)

Data

Violet/Orange (MS CAN)

Yellow/Red (60A)

Brown/Yellow

- N.C.

Green/Violet

- N.C.

Green/Violet

Yellow/Red (60A)

(chassis ground)

(+/-)

Wire Color

Gray/Yellow

Violet/Gray

Violet/Green

Blue/Gray

Data

Yellow/Orange

Data

Violet/Gray