Directed Directechs DB3 Manual de instalación - Página 5

Imprimir página

Directed Directechs DB3 Manual de instalación

Wiring diagram

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram (

(+) Starter:

2 3

Red/Gray, pin 1

G plug

at VESCM

(under drivers dash)

FT CAN High: Orange/Green, pin 8

FT CAN Low: Orange/ Brown,pin 7

VESCM Connector L

(under drivers dash)

Ignition Switch Port

(+) 12V Interrupt: Green/Red, pin 3

(black conn.

CUT

at keyport)

Ignition Switch Plug

(at Key Port)

Fuse 5A

E plug

at VESCM

(under

drivers dash)

87a

403.VW10 2.01 2008 Volkswagen Passat

VESCM (under drivers dash)

(+) 12V:

Red/White, pin 1

Keysense: Green,

pin 16

Fuse 5A

87a

(+) Brake: Black/Red, pin 2

10 11

Orange/Black, pin 6

(-) Ground: Brown, pin 4

Orange/Brown, pin 14

HS CAN High: Tan/Black: 3

HS CAN Low: Tan: 4

FT CAN High: Orange/Green: 5

FT CAN Low: Orange/Brown: 6

(+) Parking Light Output: Brown: 7

Parking Lights Interr. (veh. side): Yellow: 8

Parking Lights Interr. (conn. side): Orange/Yellow: 9

Key Wrap: Orange/Red: 10

Key Wrap: Yellow/Red 11

Key Wrap: Brown/Red: 12

(+)12V Input: Red: 13

(-) Ground: Black: 14

(+) Starter / Brake Activation Output: Gray: 6

(+) Ignition Output: Gray/Black: 7

(-) Key Release Output: Blue/Red: 12

CUT

Parking Lights Interrupt:

Red/White or Red/Black, pin 8

(+) Parking Lights: Gray/Yellow, pin 3

HS CAN High:

OBDII

Diagnostic

Connector

HS CAN Low:

Headlight switch

(black conn. at

light switch)

You can connect to either a

XL202 RFTD OR a SmartStart

module.

Refer to the SmartStart/XL202

Installation Notes for more

information.

6: White/Black:

(-) Hood Input

Remote Start Safety

Override Switch

Hood Pin