Zanussi ZC 245 R Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico Zanussi ZC 245 R. Zanussi ZC 245 R 9 páginas. Fridge zc 245 r

Door reversal

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

1. dismantle the lower hinge (3), pin (1) and the

screw (2);

2. slide the door out from pin (G),unscrew the pin

and reposition on the opposite side;

3. unscrew the left front foot and reposition on the

opposite side;

4. unscrew the two screws which mask the holes for

fixing the hinge from the left front side;

5. reassemble the door;

6. reassemble the lower hinge (turning it 180¡), the

pin and the screw on the opposite side, as shown

in the figure;

7. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs supplied

in the documentation pack.

Attention

After completion of the door reversibility

operation, verify that the door gasket is adherent

to the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.

(for models equipped with door frame)

To fit the door panel, proceed as follows:

remove the fixing screws and remove the frame

side opposite the handle;

loosen, without removing them, all remaining

screws fixing the door frame;

insert the panel from the side on which the frame

has been removed and push it fully in;

refit the frame side and tighten all the screws.

Note

The panel size should be 1-2 mm smaller than the

door; the maximum permissible panel thickness is 4

mm.

D299

D162/1