Zanussi ZD 19/4 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico Zanussi ZD 19/4. Zanussi ZD 19/4 11 páginas. Zanussi refrigerator user manual

Imprimir página

Rear spacers

In the plastic envelope containing the Operating

Instructions are also included two wall spacers to be

fitted into the special openings provided on the back

of the appliance. Push-fit the spacers into the

openings, making sure that arrow (A) is positioned

as per Fig. and then turn the spacers through 45¡

until they lock in (arrow (A) in a vertical position).

Door reversibility

Before carrying out any work on the appliance,

unplug it from the power socket.

1. Remove the upper hinge and slide the top door

off the middle hinge.

2. Remove the middle hinge, turn it through 180¡

and refit it on the opposite side after having

removed the plugs which mask the holes. The

plugs must be refitted in the holes left open on

the opposite side.

3. Refit the top door and the top hinge.

4. Unscrew the lefthand levelling foot, which will be

refitted on the opposite side.

5. Unscrew the right-hand levelling foot, the

corresponding hinge and refit all these on the left-

hand side.

6. Reverse the handles after having removed the

clip-in screw covers. The unused holes are

masked with plastic plugs which should be

removed and refitted in the holes left open.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the cabinet.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdrier.

D039

D185

D053

PR132

D336