Zanussi ZK 24 FX Manual de instrucciones - Página 19

Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico Zanussi ZK 24 FX. Zanussi ZK 24 FX 19 páginas. Zanussi instruction booklet fridge freezer zk 24 fx

Imprimir página

Water Connection

The ice maker water supply tube must be connected a

a drinking water supply.

The water supply must have a water pressure within

the following limits:

Minimum pressure 2.1 bars (30psi)

Maximum pressure 8.3 bars (120 psi)

The quality of the ice is dependent upon the water

quality. It is recommended that the ice maker water is

not softened. If the ice maker is connected to softened

water ensure the softener is maintained and working

correctly.

To connect the water supply:

Turn off the water supply and disconnect the

appliance from the power supply.

Remove the three retaining screws and bend the

black cover at the perforations.

Connect the water hose supplied to the water

supply connection.

Turn on the water supply and check all connec-

tions for leaks.

Pull the black cover and replace the three retain-

ing screws.

Plug in the appliance.

NOTE

•

Ice production will begin when the freezer

reaches normal operating temperature. See page 5

"Ice Maker" and "Water Dispenser".

•

Air in the plumbing lines after installation may

cause the ice maker to cycle two or three times

before making a full tray of ice.

•

New plumbing may cause ice to be discoloured or

have poor flavour. Discard ice made during the

first 24 hours.

Remove retain-

ing screws

Bend back the

black cover

Water supply

connector

Replace retain-

ing screws