Zanussi ZKN20/10S Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Frigorífico Zanussi ZKN20/10S. Zanussi ZKN20/10S 17 páginas.
También para Zanussi ZKN20/10S: Manual del usuario (15 páginas)

Imprimir página

Changing the opening direction

of the doors

If you wish to change the opening side of the doors

proceed as follows:

1... Open the freezer door. All the appliances have a

ventilation socle at the bottom. Remove it pushing

strongly on the central and upper part. The upper

supports will be loosed takes the piece out. Then,

take the hinge cover off the opposite side of the

ventilation cover and place it as required. (see fig.

7).

2... Removing the central hinge:

– Open both doors.

– Remove the external pin and then close the free-

zer door.

– Remove the other pin and close the fridge door.

– Taking care the doors do not fall, pull them off till

bolts are loose.

– Put the doors carefully on the floor.

3... Chage the bolts of the upper and lower hinges to

the opposite side. Change also the plastic covers of

the central partition.

4... Change the door self-closing system, putting the

freezer door's on the fridge door and viceversa.

5... Fit the freezer door into the lower hinge bolt and

put the central hinge into the door.

6... Fit the fridge door into the upper hinge bolt. Pulling

both doors outwards, fit the central hinge bolt too.

Place the doors.

7... Open the fridge door and screw the central hinge

pin. Then, open the freezer door and screw the

other pin.

8... Assemble socle keep the door open, close it up to

the metallic part.

Fit the two lower flaps of the plastic piece into the

metallic one, press down wards the two upper

hooks (without stopping pressing the socle).

Push it to wards the metallic one till they fit per-

fectly.

Once finished make sure that all joints close per-

fectly well all around the door and check that the

internal light turns off when the fridge door closes.

(see Fig. 8)

Fig. 7

Fig. 8