Zanussi ZRA33400WA Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Frigorífico Zanussi ZRA33400WA. Zanussi ZRA33400WA 28 páginas. Refrigerator
También para Zanussi ZRA33400WA: Manual del usuario (12 páginas)

Imprimir página

Operation

Switching on

Insert the plug into the wall socket.

Turn the Temperature regulator clockwise to a

medium setting.

Switching off

To turn off the appliance, turn the Temperature

regulator to the "O" position.

Temperature regulation

The temperature is automatically regulated.

To operate the appliance, proceed as follows:

• turn the Temperature regulator toward lower

settings to obtain the minimum coldness.

• turn the Temperature regulator toward high-

er settings to obtain the maximum coldness.

A medium setting is generally the most

suitable.

First use

Cleaning the interior

Before using the appliance for the first time,

wash the interior and all internal accessories

with lukewarm water and some neutral soap

Daily use

Movable shelves

The walls of the refrigerator are equipped with

a series of runners so that the shelves can be

positioned as desired.

Positioning the door shelves

To permit storage of food packages of various

sizes, the door shelves can be placed at differ-

ent heights.

www.zanussi.com

However, the exact setting should be chosen

keeping in mind that the temperature inside

the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

Important! If the ambient temperature is high

or the appliance is fully loaded, and the

appliance is set to the lowest temperatures, it

may run continuously causing frost to form on

the rear wall. In this case the dial must be set

to a higher temperature to allow automatic

defrosting and therefore reduced energy

consumption.

so as to remove the typical smell of a brand-

new product, then dry thoroughly.

Important! Do not use detergents or abrasive

powders, as these will damage the finish.

Gradually pull the shelf in the direction of the

arrows until it comes free, then reposition as

required