Zanussi ZRB834NW Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Frigorífico Zanussi ZRB834NW. Zanussi ZRB834NW 16 páginas.

Imprimir página

2. Raise the shelf from the rear and push it forward

until it is freed (B).

3. Remove the retainers (C).

Door reversibility

Warning! Before carrying out any operations,

m1 m2

m3 m4

• Open the doors. Un-

screw the middle hinge

(m2). Remove the plas-

tic spacer (m1).

• Remove the doors.

• Remove the left-hand

cover pin of the middle

hinge (m3,m4) and

move to the other side.

• Fit the pin of the middle

hinge (m5) into the left-

hand hole of the lower

door.

Do a final check to make sure that:

• All screws are tightened.

• The edges of the doors run parallel to the side edge

of the appliance.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that case,

Environmental concerns

The symbol

on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

• Unscrew the lover

hinge (b1)

• Remove the left-hand

cover pins (b4) and

move to the other side.

• Re-screw the lover

hinge (b1) on the oppo-

site side.

• Unscrew the lower

hinge pivot (b2) and the

spacer (b3) and place

them on the opposite

side.

remove the plug from the power socket.

Important! To carry out the following operations, we

suggest that this be made with another person that will

keep a firm hold on the doors of the appliance during

the operations.

• Remove the plugs (1)

on the upper side of

both doors and move

them to the other side.

• Re-insert the the lower

door on the lower hinge

pivot (b2).

• Insert the middle hinge

(m2) into the left drill of

the lower door.

wait for the natural fitting of the gasket or accelerate

this process by heating up the part involved with a nor-

mal hair drier.

In case you do not want to carry out the above men-

tioned operations, contact the nearest After Sales Serv-

ice Force. The After Sales Service specialist will carry

out the reversibility of the doors at your cost.

potential negative consequences for the environment

and human health, which could otherwise be caused

by inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local council, your

• Unscrew the upper

hinge pivot and place it

on the opposite side.

• Fit the upper door on

the upper door pivot.

• Re-insert the upper

door on the middle

hinge pivot (m5) slight-

ly tilting both doors.

• Re-screw the middle

hinge (m2). Do not for-

get the plastic spacer

(m1).