Zanussi FM5611 Instrucciones de uso y cuidado - Página 10
Navegue en línea o descargue pdf Instrucciones de uso y cuidado para Horno Zanussi FM5611. Zanussi FM5611 20 páginas. Built-in oven
También para Zanussi FM5611: Manual de instrucciones de uso y mantenimiento (20 páginas), Manual de instrucciones (20 páginas)
Imprimir página
Use
Current time setting
The clock is preset to show the hours
from 1 to 24 and the minutes from 0 to
60. When first connecting the apphance
to the power supply, the numbers of the
display and the pilot lamp [j] will flash
indicating that tiie clock needs to be set
To enter the cmrent time proceed as
follows:
simultaneously depress pushbuttons
C (A) 0 (B) and turn knob
- + (E) as required until the correct hour
and minutes are entered.
The electronic clock starts when you
release pushbuttons 0 (A) and
O (B) (pilot lamp
^
off and lamp a
switched on).
For further resetting repeat the above
sequence.
Setting the minute minder with
sound signal (buzzer)
The minute minder can be used only
with the programmer set on manual
operation (knob (D) depressed).
The maximum programmable time for
the buzzer is 23 hrs. and 59 mins.
Proceed as follows to set the minute
minder:
depress knob (D) (pilot lamp [H
switches off and lamp S switches on);
depress pushbutton 0 (A) and at the
same time turn knob - + (E) and set the
desired time period.
Release pushbutton (A).
When the programmed time is up, the
buzzer will ring for 2 minutes uidess it is
switched off by depressing pushbutton
0
(A).
The minute minder, even though
signaling other functions, will always
buzz for a maximum of 2 minutes unless
interrupted by depressing pushbutton
0
(A).
Semi-automatic operation
of the oven
It is possible to start cooking
immediately and to programme the
period of the cooking process.
The maximirai programmable cooking
period is of 23 hrs. and 59 mins.
Place the food to be cooked into the
oven, turn the selector and thermostat
knobs (Fig. 1 and 3) to the desired
setting and proceed as follows:
depress pushbutton 0 (B) and, keeping
it depressed, enter the required cooking
period with knob - + (E); when you
release pushbutton
0
(B) pilot lamps [[)
and CT will remain switched on
indicating that the programme is
operating. At the end of the cooking
process the buzzer will ring. At the same
time pilot lamp S switches off and
pilot lamp d] flashes; to switch it off
depress pushbutton (D), lamp S
switches on.
10