Zanussi ZOK37901 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Horno Zanussi ZOK37901. Zanussi ZOK37901 24 páginas.

Imprimir página

Clock functions

SYMBOL

FUNCTION

MINUTE MINDER

TIME OF DAY

DURATION

Press

again and again to change the

clock function.

Press

to confirm the settings of the

clock functions, or wait 5 seconds for the

setting to be confirmed automatically.

Setting the DURATION or END

1. Press

again and again until the display

shows

flashes in the display.

2. Press

to confirm.

For Duration

and then the hours, for End

the hours and then the minutes.

An acoustic signal sounds for 2 minutes af-

ter the time ends.

time setting flash in the display. The oven

stops.

3. Press any button or open the oven door to

stop the acoustic signal.

If you press

DURATION

setting of the END

Setting the MINUTE MINDER

1. Press

and "00" flash in the display.

To set a countdown time. This function has no effect on the operation

of the oven. You can set the MINUTE MINDER at any time, also when

the appliance is off.

To set, change or check the time of day. Refer to "Setting the time".

To set how long the appliance must operate. First set an oven func-

tion before you set this function.

END

To set when the appliance must be deactivated. First set an oven

function before you set this function. You can use Duration and End

at the same time (Time Delay) to set the time when the appliance

must be activated and then deactivated.

to set the values and press

first you set the minutes

first you set

symbol and

when you set the hours for

, the appliance goes to

function.

DESCRIPTION

2. Press

ER. At first, the time is calculated in mi-

nutes and seconds. When the time you set

is longer than 60 minutes, the symbol

comes on in the display. The appliance now

calculates the time in hours and minutes.

3. The MINUTE MINDER starts automatically

after five seconds.

After 90% of the set time, an acoustic sig-

nal sounds. Press a button to stop the sig-

nal.

4. When the set time ends, an acoustic signal

sounds for two minutes. "00:00" and

flash in the display. Press a button to stop

the signal.

If you set the MINUTE MINDER when the

DURATION or END function operates, the

symbol

comes on in the display.

Count Up Timer

Use the Count Up Timer to monitor how long

the oven operates. It is on immediately when the

oven starts to heat.

To reset the Count Up Timer, press and hold

and

You cannot use the Count Up Timer when

Duration or End function operates.

to set the MINUTE MIND-