Zanussi FE 1024 N Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Lavadora Zanussi FE 1024 N. Zanussi FE 1024 N 21 páginas. Washing machine fe 925n; fe 1024 n

Imprimir página

132992210.qxd

4/7/03

10:29 AM

Installation

Unpacking

All transit bolts and packing must be

removed before using the appliance.

You are advised to keep all the packaging for re-use

in case the machine is to be transported again.

1. Using a spanner unscrew and remove the two

rear bottom screws. Slide out the two plastic

pins. Lay the machine gently on its back, making

sure that the hoses are not squashed.

2. Remove the polystyrene block from the bottom

of the machine and release the two plastic bags.

3. Very carefully slide out the left polythene bag,

removing it towards the right and then

downwards.

4. Repeat the operation for the right polythene bag,

removing it towards the left and then upwards.

5. Remove the polystyrene base.

Set the machine upright and unscrew the

remaining rear screw. Slide out the relevant pin.

Pagina

(Nero/Process Black pellicola)

Fill all the holes with the plastic plugs supplied with

the instruction booklet.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

Water inlet

Connect the water inlet hose supplied with the

machine to a tap with a 3/4" thread.

Do not use already employed hoses.

The other end of the inlet hose which connects to

the machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too

short and you do not wish to move the tap, you will

have to purchase a new, longer hose specially

designed for this type of use.