Zanussi FE1005 Manual de instrucciones - Página 15

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Zanussi FE1005. Zanussi FE1005 23 páginas. Washing machine fe 1005

Imprimir página

1. Control Panel

132988070gb.qxd

01/06/2004

Operating sequence

Before the first wash we recommend that you pour 2

litres of water into the main wash compartment of the

detergent drawer in order to activate the ECO valve.

Then run a cotton cycle at 60°C, with the machine

empty, in order to remove any manufacturing residue

from the drum and tub. Pour half a measure of

detergent into the main wash compartment and start

up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you have selected the prewash

detergent into the appropriate compartment marked

3. Measure out the additive

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

17.41

Pagina

function, pour

4. Switch the machine on

Press the ON/OFF button

on. The display will show three blinking dashes or a

blinking zero. The light above the button will light up.

5. Select the desired programme/fabric

Press the FABRIC button

select the desired programme/fabric. The relevant

light will light up.

The lights relevant to the phases that form the

programme will light up.

The display will show the duration of the selected

programme, calculated on the basis of the maximum

load for each type of fabric. The START/PAUSE

button light will start flashing.

If the load of laundry to be washed is small, at the

beginning of the cycle the display will still indicate the

duration relevant to the maximum load. The duration

value will be gradually adjusted during the execution

of the cycle.

6. Select the temperature

Press the TEMPERATURE button

select a temperature value different from the one

proposed by the washing machine.

The relevant light will light up.

to switch the machine

repeatedly, in order to

if you wish to