Zanussi ZDT26011FA Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Lavavajillas Zanussi ZDT26011FA. Zanussi ZDT26011FA 21 páginas.
Imprimir página
BEFORE STARTING A PROGRAMME
Make sure that:
•
The filters are clean and correctly installed.
•
The cap of the salt container is tight.
•
The spray arms are not clogged.
•
There is dishwasher salt and rinse aid (unless
you use multi- tablets).
•
The position of the items in the baskets is
correct.
•
The programme is applicable for the type of load
and for the degree of soil.
•
The correct quantity of detergent is used.
CARE AND CLEANING
WARNING! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
main socket.
CLEANING THE FILTERS
C
•
Make sure that there are no residues of food or soil in or around the edge of the sump.
•
Put back in place the flat filter (C). Make sure that it is correctly positioned under the 2 guides.
•
Reassemble the filters (A) and (B).
•
Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks.
An incorrect position of the filters can cause bad washing results and damage to the
appliance
CLEANING THE SPRAY ARMS
Do not remove the spray arms. If the holes in the
spray arms are clogged, remove remaining parts of
soil with a thin pointed object.
14
UNLOADING THE BASKETS
1. Let the tableware cool down before you
remove it from the appliance. Hot items can be
easily damaged.
2. First remove items from the lower basket, then
from the upper basket.
At the end of the program water can
still remain on the sides and on the
door of the appliance.
Dirty filters and clogged spray arms
decrease the washing results. Make a
check regularly and, if necessary,
clean them.
EXTERNAL CLEANING
•
Clean the appliance with a moist soft cloth.
•
Only use neutral detergents.
•
Do not use abrasive products, abrasive cleaning
pads or solvents.
B
A