Zanussi ZDV12002FA Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Lavavajillas Zanussi ZDV12002FA. Zanussi ZDV12002FA 17 páginas.
También para Zanussi ZDV12002FA: Instrucciones de uso (3 páginas)

Imprimir página

German degrees

French degrees

(°dH)

11 - 14

4 - 10

1) Factory setting

2) Do not use salt at this level.

ACTIVATING THE ACOUSTIC SIGNAL FOR THE END OF PROGRAMME

By default this acoustic signal is deactivated but it is possible to activate it.

1. While the appliance is in user mode, within about 5 seconds press programme button: the indicator

is on and the indicator

2. Wait until the indicator

3. Press programme button to change the setting. The indicator

4. Press on/off button to confirm the setting.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

mmol/l

(°fH)

19 - 25

7 - 18

starts to flash.

goes off. The indicator

Clarke degrees

1.9 - 2.5

13 - 17

0.7 - 1.8

<0.7

is off. The acoustic signal is off.

is on. The acoustic signal is on.

Do not use detergent and do not load the

baskets.

When you start a programme, the appliance can

take up to 5 minutes to recharge the resin in the

water softener. It seems that the appliance is not

working. The washing phase starts only after this

procedure is completed. The procedure will be

repeated periodically.

Water softener

level

5 - 12

< 5