Zanussi ZIDW 954 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Lavavajillas Zanussi ZIDW 954. Zanussi ZIDW 954 20 páginas.
Imprimir páginaUSE
Control panel
1
THE CONTROLS
In this fully integrated appliance the controls are located
on top of the door. When selecting a programme, the
door needs to be partially opened.
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short «instruction accepted» signal
When any of the buttons is pressed: a short audible
signal informs you that the machine has accepted the
instruction given; if no signal is heard when a button is
pressed, this means that a programme is already
running or that the programme selected does not
include this function.
Long «programme run» signal
A continuous audible signal lasting about one second,
heard only when you close the dishwasher door,
informs you that the wash programme is starting.
Intermittent «end of programme» signal
An intermittent audible signal, lasting in total five seconds,
informs you that the wash programme has ended.
If you wish to deactivate these audible signals, press
both the «ECONOMY DRY» and «DELAY START»
buttons together for about 3 seconds, until three short
signals are heard.
SO76
To reactivate the audible signals, press both buttons
together again for about 3 seconds, until the short
«instruction accepted» signal is heard.
PROGRAMME
SELECTOR
2 3
4
DELAY
ECONOMY
START
DRY
CANCEL
5
6
7
1. ON/OFF
ON
Press this button to preset the dishwasher to accept
settings (selection of wash programmes, drying
options, delayed start, etc.).
The number
corresponding to the first selectable
programme (Rinse and Hold) appears in the digital
display (2).
OFF
When the wash programme has ended, the dishwasher
stops automatically (an intermittent audible signal
lasting about 5 seconds informs you of this) and a
flashing horizontal line
To switch off the dishwasher at the end of the
programme, press this button again.
2. Digital display
3. Programme selector button
To select the required programme, press this button un-
til the number corresponding to the chosen programme
appears in the digital display (2) see «Washing
Programmes» chart.
To start the programme, simply close the dishwasher
door. A long audible signal (about 1 second) informs
you that the programme is starting.
4. Intensive programme light «
This pilot light comes on when the most energetic pro-
gramme is selected (no. 2 INTENSIVE) with hot pre-
wash, suitable for pans and particulary dirty crockery,
to remind you that this programme requires an extra
dose of detergent (10 g) to be poured in the SID dis-
penser. Follow the dosing instructions in the «Wash-
ing Programmes» chart.
PPC16GB
5
appears in the digital display.
»