Zanussi ZSF 4143 Manual del usuario - Página 18
Navegue en línea o descargue pdf Manual del usuario para Lavavajillas Zanussi ZSF 4143. Zanussi ZSF 4143 24 páginas.
Imprimir página
Switch off the dishwasher, open the door and
carry out the following suggested corrective ac-
tions.
Fault code and malfunction
The dishwasher does not fill with water.
• continuous flashing of the light of the running
programme
• 1 flash of the "End of programme" light
The dishwasher will not drain.
• continuous flashing of the light of the running
programme
• 2 flashes of the "End of programme" light
• continuous flashing of the light of the running
programme
• 3 flashes of the end of programme indicator light
• The programme does not start.
Once these checks have been carried out;
close the dishwasher's door and switch on the
appliance. Press the button of the programme
that was running before the intervention of the
alarm. The programme will continue from the
point at which it was interrupted.
If the malfunction or fault code reappears con-
tact the Service Force Centre.
18
Possible cause and solution
• The water tap is blocked or furred with limescale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the threaded hose fitting
at the water inlet valve is blocked.
Clean the filter in the threaded hose fitting.
• The water inlet hose has not been correctly laid or
it is bent or squashed.
Check the water inlet hose connection.
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been correctly laid or
it is bent or squashed.
Check the water drain hose connection.
• Anti-flood device is activated
Close the water tap and contact your local Service
Force Centre.
• The dishwasher door has not been properly closed.
Close the door.
• The main plug is not plugged in.
Insert the mains plug.
• The fuse has blown in the household fuse box.
Replace the fuse.
For other fault codes not described in the above
chart, please contact your Service Force Cen-
tre.
Contact your local Service Force Centre, quot-
ing the model (Mod.), product number (PNC)
and serial number (S.N.).
This information can be found on the rating
plate located on the side of the dishwasher
door.