Zanussi ZTI 6100 Libro de instrucciones - Página 24

Navegue en línea o descargue pdf Libro de instrucciones para Lavavajillas Zanussi ZTI 6100. Zanussi ZTI 6100 27 páginas.

Building-in

This dishwasher is designed to be fitted under a

kitchen counter or worksurface.

It is essential that the recess dimensions indicated in

the diagram are followed.

No further openings for venting of the dishwasher are

required, but only to let the water fill and drain hose

and power supply cable pass through.

The recess height may be anywhere between 820 and

900 mm from the floor as the dishwasher incorporates

adjustable feet (max 80 mm).

A distance of 2 mm should be allowed between the

top of the dishwasher and the counter top.

II89

Adjusting the height of the

appliance

To adjust the height proceed as follows:

1. Loosen or tighten the two front feet.

2. The rear foot is adjusted by turning the screw in the

middle of the front kick plate to the left or right.

Pads are supplied for the feet to make sliding the

appliance in and out of the recess easier.

To fit the pads, press them onto the feet.

If required, the dimensions of these pads can be

II52

reduced by breaking them where marked.

Good levelling is essential for correct closure and

sealing of the door. When the appliance is correctly

levelled, the door will not catch on the levelling

spacers on either side of the cabinet.

If the door does not close correctly, loosen or tighten

the adjustable feet until the machine is perfectly level.

INS01en