Zanussi ZTM 6825 Manual de instrucciones - Página 23

Navegue en línea o descargue pdf Manual de instrucciones para Lavavajillas Zanussi ZTM 6825. Zanussi ZTM 6825 26 páginas.

The furniture door

The door on this appliance is designed for the

overlay of a panel having the following dimensions:

Width

596 cm

Height

644 - 724 mm max

Thickness

20 mm max

Weight

2 - 7.5 kg max

The panel height should be no more than

indicated, otherwise complete opening of the

door will no longer be possible as the panel

hits against the dishwasher plinth.

Mounting the furniture door onto the

door

The height of the panel depends on the height of

adjacent kitchen units (see kitchen plinth

adjustment).

The panel must be fitted with a handle, as the

dishwasher handle will be hidden by the panel. Drill

the panel with a Ø 2 x 12 bit according to the

dimensions indicated in the figure.

Fix cross bar onto the panel using 3.5 x 16 screws

provide.

Mount the decor panel by inserting the two pivots

of the cross-bar into the slotted holes of the door.

Lift the decor panel until perfect alignment with the

fascia panel is obtained.

Once the correct position has been found, open the

door and fasten the decor panel on the lower and

upper section by means of the four 4 x 40 screws

provided, using the holes through the inner door.

596 max

550

II19

II11

II56

II55

PFI07GB