Zanussi ZUCA Manual de instalación, uso y mantenimiento - Página 17

Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Lavavajillas Zanussi ZUCA. Zanussi ZUCA 17 páginas. Undercounter dishwasher

Imprimir página

Insert the hose provided in the kit into the detergent

container.

2. Dishwashers

with

rinse-aid dispenser pump (Figure 13).

Pump "S" dispenses about 0.1 g/s of rinse-aid. It

dispenses 0.3 g in 3 sec. at each rinse.

Dispenser operating time may be changed, following

the instructions given in the next paragraph.

Insert the hose provided in the kit into the rinse-aid

container (in the versions without incorporated rinse-

aid dispenser only).

3. Dishwashers

with

diaphragm dispenser pump (Figure 13).

Pump "T" is installed in appliances with pressure boi-

ler.

Dispensed amounts may be changed according to the

instructions given in the paragraph below.

Insert the supplied hose into the rinse-aid container (in

the versions without incorporated rinse-aid dispenser

only).

Connections for automatic detergent dispenser

(Figure 13)

Figure 13

There is a ready-made impression "N" to be perforated

(Ø 8 mm) for positioning the detergent concentration

measuring sensor.

In the front area of the tank there is a hole "P" (Ø 10 mm)

closed with a plug that is designed for fitting a liquid

detergent injector.

The sensor and liquid detergent injector should be

installed without prejudicing the watertightness of the

appliance.

incorporated

peristaltic

incorporated

rinse-aid

Electrical connections for automatic detergent and

rinse-aid dispensers.

Single-phase version:

The appliance has a terminal board for the power sup-

ply of dispensers operating at 230 V, max. power

30VA.

Connect to the terminal board "L" (Figure 13) to termi-

nals 1 and 2 for dispensing during the rinse cycle or to

terminals 3 and 4 for dispensing during the wash cycle.

Three-phase versions:

Terminals are available on the power supply terminal

board for the electrical connection of external dispen-

sers working at 220...240 V. Max. power 30 VA.

Figure 14

•

Connect the detergent dispenser between termi-

nals 7 and 9. These connection points are live

during filling of the tank for 165" (average filling

time at 200 kp) and during the rinse cycle.

Figure 15

•

Connect the rinse-aid dispenser between termi-

nals 8 and 9. These connection points are live

during the rinse cycle.

MANUAL ACTIVATION

Whenever the detergent containers are replaced, it

may be necessary to activate the dispensers manually

in order to fill the hoses and eliminate any air.

Simultaneously press the buttons, as shown in the

figures below. If necessary, repeat this operation

several times.

DETERGENT DISPENSER

DISPENSER RINSE-AID