Zanussi VH401H Instrucciones de uso y cuidado - Página 6
Navegue en línea o descargue pdf Instrucciones de uso y cuidado para Placa Zanussi VH401H. Zanussi VH401H 19 páginas. Zanussi hob
También para Zanussi VH401H: Instrucciones de uso y cuidado (19 páginas), Instrucciones de uso y cuidado (19 páginas)
Imprimir página
Installation
The hob must be installed in accordance
with the installation instructions for this
appliance. Connection to the electricity
supply must be made by a competent
electrician to a suitable double pole switch.
WARNING:
THIS APPLIANCE MUST
BE EARTHED
This appliance complies with the Radio
Interference reguirements of EEC
Directive 82/449/EEC.
Rating Plate
The rating plate is situated on the
underside of the unit and gives the model
and serial number of the appliance, which
should be guoted in any communication.
It is advisable to make a note of these in
the back ofthis book before the appliance
is installed.
Before Use
Please ensure that any protective film and
all packaging has been removed from the
appliance before switching on.
For conventional ceramic and Zanussi
Halogen Heat hobs:
Allow all the heated areas to run on a
medium setting for a few minutes. Any
smoking which occurs is guite normal and
if the odour emitted during this initial
burning off is unpleasant, it may be
necessary to open a window or door for
ventilation.
For all ceramic hobs:
When the appliance has cooled, apply a
thin coating of Cleaner Conditioner to the
ceramic glass panel. This will not only
protect the surface, but also make it easier
to clean after use (page 12).