Zanussi ZEV8646XBA Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Placa Zanussi ZEV8646XBA. Zanussi ZEV8646XBA 48 páginas.
También para Zanussi ZEV8646XBA: Manual del usuario (12 páginas), Manual del usuario (44 páginas)
Imprimir página
care to avoid burns. Put the special scraper
on the glass surface at an acute angle and
move the blade on the surface.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob
with a moist cloth and non-abrasive
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate
the hob.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds when
the hob is deactivated.
The hob deactivates.
Residual heat indicator does not
come on.
Automatic Heat Up function does
not operate.
10
• Remove shiny metallic discoloration:
Possible cause
The hob is not connected to an
electrical supply or it is connec-
ted incorrectly.
The fuse is blown.
You touched 2 or more sensor
fields at the same time.
There is water or fat stains on the
control panel.
You put something on one or
more sensor fields.
You put something on the sensor
field
.
The zone is not hot because it
operated only for a short time.
The zone is hot.
The highest heat setting is set.
detergent. After cleaning, wipe the hob dry
with a soft cloth.
use a solution of water with vinegar and
clean the glass surface with a moist cloth.
Check if the hob is correctly con-
nected to the electrical supply.
Refer to the connection diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Activate the hob again and set
the heat setting in less than 10
seconds.
Touch only one sensor field.
Clean the control panel.
Remove the object from the sen-
sor fields.
Remove the object from the sen-
sor field.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
Let the zone become sufficiently
cool.
The highest heat setting has the
same power as the function.
Remedy
www.zanussi.com