Zanussi ZGF 7820 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Placa Zanussi ZGF 7820. Zanussi ZGF 7820 20 páginas. Zanussi instructrion manual gas range zgf 7820

Imprimir página

Installation

IMPORTANT: This hob must be installed by a

competent person to the relevant Gas Standards.

Any gas installation must be carried out by a

competent person.

The manufacturer will not accept liability, should

the above instructions or any of the other safety

instructions incorporated in this book be ignored.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to

remove any protective materials, which were put

on in the factory.

On the end of the shaft, which includes the G 1/2"

threaded elbow, adjustment is fixed so that the washer

is fitted between the components as shown in the

diagram. Screw the parts together without using

excessive force.

Gas Connection

Connection to the gas supply should be with either rigid

or semi-rigid pipe, i.e. steel or copper.

The connection should be suitable for connecting to R

1/2" (1/2 BSP male thread).

When the final connection has been made, it is essential

that a thorough leak test is carried out on the hob and

installation. Ensure that the main connection pipe does

not exert any strain on the hob.

Cut Out Size

The dimensions of the cut-out are given in the diagram.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

It is important to install the elbow correctly, with

the shoulder on the end of the thread, fitted to the

hob connecting pipe.

Failure to ensure the correct assembly will cause

leakage of gas.

Rectangular cut-out size for hob

Dimensions are given in mm.

FO 2038

FO 0814