Zanussi ZGG76524 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Placa Zanussi ZGG76524. Zanussi ZGG76524 21 páginas. Gas hob
También para Zanussi ZGG76524: Manual del usuario (16 páginas), Manual del usuario (48 páginas), Manual del usuario (20 páginas)
Imprimir página
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
shock hazard. Ensure that the cut off
plug is disposed of safely.
REPLACEMENT OF THE CONNECTION
CABLE
The replacement of electric cable must
be carried out exclusively by the
service force centre or by personnel
with similar competencies, in
accordance with the current
regulations.
To replace the connection cable use
only H03V2V2-F T90 or equivalent
type. Make sure that the cable section
is applicable to the voltage load and
the working temperature. The yellow/
green earth wire (B) must be
approximately 2 cm longer than the
live and neutral wire (A).
1. Connect the green and yellow (earth) wire to
the terminal which is marked with the letter 'E',
or the earth symbol
yellow.
2. Connect the blue (neutral) wire to the terminal
which is marked with the letter 'N' or coloured
blue.
3. Connect the brown (live) wire to the terminal
which is marked with the letter 'L'. It must
always be connected to the network phase.
There must be no cut or stray strands of wire
present. The cord clamp must be correctly
attached to the outer sheath.
A
B
, or coloured green and
ASSEMBLY
1.
2.
3.
min. 600 mm
min. 200 mm
min. 55 mm
30 mm
4.
50 mm
min. 650 mm
560 mm
400 mm
13