Zanussi ZGO96524 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Placa Zanussi ZGO96524. Zanussi ZGO96524 17 páginas.
También para Zanussi ZGO96524: Manual del usuario (16 páginas)

Imprimir página

• This appliance is supplied with a mains

cable. It has to be supplied with a correct

plug which can hold the load that the rating

plate rates. Make sure that you install the

plug in a correct socket.

• Always use a correctly installed shockproof

socket.

• Make sure that there is an access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• There is a risk of fire when the appliance is in

connection with an extension cable, an

adapter or a multiple connection. Make sure

that the ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up to a

temperature higher than 90° C.

Make sure that you connect the blue

neutral cable to the terminal with a

letter "N" on it. Connect the brown

(or black) phase cable to the

terminal which has a letter "L". Keep

the phase cable connected at all

times.

Connection cable

To replace the connection cable use only the

special cable or its equivalent. The cable type

is: H05V2V2-FT90.

Make sure that the cable section is applicable

to the voltage and the working temperature. The

yellow / green earth wire must be approximately

2 cm longer than the brown (or black) phase

wire.

Assembly

min. 450 mm

min. 55 mm

30 mm

min. 650 mm

830 mm