Zanussi ZGS 64IX Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Placa Zanussi ZGS 64IX. Zanussi ZGS 64IX 24 páginas.

Fitting the hob to the worktop

The hobs can be installed in a kitchen

unit with an opening for insertion whose

dimensions are shown in Fig. 11. To

install the hob, proceed as follows:

1) Remove the pan supports, the

burners caps and crowns and turn

the hob upside down.

2) Place the sealing gasket (supplied

with the hob) on the edges of the cut

out: place it exactly on the front and

rear edge, taking care that the

sealings meet without overlapping;

3) Fix the hob with the relevant screws

(Fig. 12). The traction of the screws

is able to trace the sealing, any

excess of which can be easily

removed.

The edge of the hob forms a double

labyrinth seal which provides a total

guarantee against infiltration of liquids.

Dimensions are given in millimeters

Fig. 11

sealing

gasket

Fig. 12