Zanussi ZGS 782 ICT Manual de instrucciones - Página 18
Navegue en línea o descargue pdf Manual de instrucciones para Placa Zanussi ZGS 782 ICT. Zanussi ZGS 782 ICT 32 páginas. Electrolux gas hob instruction booklet
También para Zanussi ZGS 782 ICT: Manual de instrucciones (32 páginas)
Imprimir página
On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment
is fixed so that the washer is fitted between the components as shown in the
diagram. Screw the parts together without using excessive force.
Gas Connection
Gas Connection
Gas Connection
Gas Connection
Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or
copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is
carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
It is important to install the elbow corr
It is important to install the elbow correctly
It is important to install the elbow corr
It is important to install the elbow corr
It is important to install the elbow corr
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
18
FO 0264
A) End of shaft with nut
B) Washer
C) Elbow
ectly
ectly, with the shoulder on
ectly
, with the shoulder on
, with the shoulder on
, with the shoulder on
ectly
, with the shoulder on