Zanussi ZKT 621 LN Instrucciones de uso e instalación - Página 14
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Placa Zanussi ZKT 621 LN. Zanussi ZKT 621 LN 22 páginas. Elektric ceramic glass hob
También para Zanussi ZKT 621 LN: Manual de instrucciones de instalación y funcionamiento (18 páginas)
Imprimir página
Cleaning and care
Attention! Cleaners must not get onto the hot ce-
ramic glass surface! After cleaning all residues of
cleaners must be removed with sufficient clean
water, as they may be caustic when being rehea-
ted.
Never use aggressive or abrasive agents, such
as oven sprays, stain or rust removers, scouring
powder, or sponges with an abrasive effect.
Suitable cleaning materials are: clean cloth or
household paper, hot water with detergent, suita-
ble commercial cleaners and cleaning scrapers.
Cleaning scrapers and ceramic glass cleaners
are available from the expert trade and in markets
for building material.
Ceramic glass surface
Clean the ceramic glass surface after every use
D
when it is hand warm or cold. This will avoid spills
becoming burnt on.
Remove scale and water marks, fat spots and
D
metallic shimmering discoloration with a commer-
cial ceramic glass cleaner such as Vitroclen.
Light soilage
Wipe the ceramic glass surface with a damp cloth,
D
and a little washing up liquid.
Then rub dry with a clean cloth. No residues of
D
cleaner must be left on the surface.
Once a week, throroughly clean the entire cera-
D
mic glass surface with a commercial ceramic
glass cleaner such as "Vitroclen". Always ensure
that the hob is dry after cleaning.
Stubborn soilage
To remove food that has boiled over or burnt on
D
spots, use a glass scraper.
Place the glass scraper at an angle to the ceramic
D
glass surface. Remove soiling by sliding the scra-
per.
14