Zanussi ZKT 621 LX Instrucciones de uso e instalación - Página 9
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Placa Zanussi ZKT 621 LX. Zanussi ZKT 621 LX 22 páginas. Elektric ceramic glass hob
También para Zanussi ZKT 621 LX: Manual de instrucciones de instalación y funcionamiento (18 páginas)
Imprimir página
Cooking zone selection
To activate a cooking zone keep the correspon-
D
ding control touched for about one second. A zero
with digital point
ding cooking zone display.
Setting selection
For selecting or changing the setting for the coo-
D
king zone from
to
use the
touch control to increase the setting.
use the
touch control to reduce the setting.
Cooking zone switch- -off
1. Select the desired cooking zone by means of
D
the cooking zone touch control.
2. For switching off push the
D
trols at the same time or return to zero with the
touch control.
Residual heat indicator
After switching off a single cooking zone or the entire
hob any residual heat is indicated by
in the display of the corresponding cooking zone.
Even after switching off a cooking zone the residual
heat indicator will go out only after sufficient cooling
down of the cooking zone.
The residual heat can be used for the melting and
keeping dishes warm.
Caution! While the
and there is a risk of burning.
Caution! If there is a power failure the
out even if there is residual heat in the hob. Care
will have to be taken until there is no longer a risk
of burning.
comes on in the correspon-
- -
.
and
touch con-
("hot")showing
is illuminated the hob is hot
will go
9