Zanussi ZKT 630 D Libro de instrucciones - Página 11

Navegue en línea o descargue pdf Libro de instrucciones para Placa Zanussi ZKT 630 D. Zanussi ZKT 630 D 22 páginas. Glass ceramic induction hob

Zanussi ZKT 630 D Libro de instrucciones

Cooking without the Automatic Heating-Up Function

1. For heating up/browning, select a high power.
2. As soon as steam forms or the fat is hot, switch
back to the required continued cooking stage.
3. Reset to zero in order to end cooking.
Note:
2

Cooking with the Automatic Heating-Up Function

All four cooking zones of the cooking field can be
controlled in nine stages and have an automatic hea-
ting-up function:
– !, Lowest cooking stage
– ), Highest cooking stage
– a, Heating-up function.
With the automatic heating-up function (a), the coo-
king zone operates for a certain time at full capacity
and then automatically switches back to the set con-
tinued cooking stage.
The duration of the automatic heating-up function
depends on the selected continued cooking stage.
1. Select the required cooking zone with the coo-
king zone sensor fields. The decimal point in the
associated display field illuminates.
2. With the + or - sensor fields set the cooking
stage 9. Put down briefly and press the + sensor
field again.
When cooking with the induction cooking
zone you should take into account that
– the heating-up times are reduced by the direct
energy transfer to the pan!
– the cooking process stops immediately after the
cooking zone is switched off (no boiling over!)
A lights up in the cooking stage display.
3. Next, press the sensor field - and set the requi-
red continued cooking stage - to (. The conti-
nued cooking stage set is then displayed.
After 5 seconds, a appears in the display again
instead of the continued cooking stage. The conti-
nued cooking stage is displayed again after the hea-
ting-up time expires.
If you select a higher stage when the auto-
3
matic function is in operation, e.g. from § to
%, the previous heating-up time is taken
into account. If you select a lower stage,
then the automatic function is brought to an
immediate end. If you start cooking again on
a cooking zone that is still warm, the auto-
matic heating-up function uses the residual
heat. This saves time and energy.
11