Zanussi zft 710 w Manual del usuario - Página 39

Navegue en línea o descargue pdf Manual del usuario para Congelador Zanussi zft 710 w. Zanussi zft 710 w 48 páginas.

Imprimir página

accessories of the adjustable feet. If levelling the

appliance requires, these washers can be removed.

Do not stand the appliance on a sunny place or close

to a radiator or cooker.

If it is unavoidable because of furnishing and the appli-

ance has to be stood near a cooker take these mini-

mum distances into consideration:

In case of gas or electric cooker 3 cm must be left,

when it is less put a 0,5 - 1 cm non-flam insulation

between the two appliances.

In case of oil or coal-fired stove the distance must

be 30 cm since they give off more heat.

The refrigerator is designed to operate when it is total-

ly pushed to the wall.

Switch and indicator unit

For the usage of the switching and indicator unit see

chapters "Putting it into use", "Controlling the temper-

ature" and "Freezing".

Components of the appliance are as follows:

A) Green indicator lamp

This lamp lights when the appliance is under

power, i.e. the mains plug is in the mains socket.

B) Red indicator lamp

It lights up depending on the temperature inside

the appliance.

It lights for a short time when starting the appli-

ance, placing fresh food into it and when the tem-

perature control knob has been turned in direc-

tion to lower temperatures.

It lights permanently when the temperature inside

the appliance is too high (overloaded with warm

food, door stayed open or the door seal does not

close properly) or possibly the appliance was bro-

ken down.

When placing the refrigerator keep minimal dis-

tances recommended in figure.

A: placing it under a wall-cupboard

B: placing it freely

C) Yellow indicator lamp and freezer switch

In the switched-on state of the switch (pops up

and lights by pressing) the compressor operates

continuously thus providing for the coldest interior

temperature - achievable by the freezer - needed

for freezing.

D) Temperature control knob

This knob is provided for setting and changing the

temperature inside the appliance.