Zanussi ZFU23400WA Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Congelador Zanussi ZFU23400WA. Zanussi ZFU23400WA 16 páginas.

Positioning

This appliance can be installed in a dry, well

ventilated indoor, also in a garage or cellar, but

for optimum performance install this appliance

at a location where the ambient temperature

corresponds to the climate class indicated on

the rating plate of the appliance:

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Location

The appliance should be installed well away

from sources of heat such as radiators, boilers,

direct sunlight etc. Ensure that air can circulate

freely around the back of the cabinet. To ensure

best performance, if the appliance is positioned

below an overhanging wall unit, the minimum

distance between the top of the cabinet and

the wall unit must be at least 100 mm . Ideally,

however, the appliance should not be posi-

tioned below overhanging wall units. Accurate

levelling is ensured by one or more adjustable

feet at the base of the cabinet.

Warning! It must be possible to

disconnect the appliance from the mains

power supply; the plug must therefore be easily

accessible after installation.

Rear spacers

You can find the two spacers in the bag with

documentation.

Do these steps to install the spacers:

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.