Zanussi ZFU25200WA Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Congelador Zanussi ZFU25200WA. Zanussi ZFU25200WA 16 páginas. Freezer zanussi

Imprimir página

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

Important! The wires in the mains lead are

coloured in accordance with the following

code:

A Green and Yellow:

C Brown:

D Blue:

As the colours of the wires in the mains lead of

this appliance may not correspond with the col-

oured markings identifying the terminals in your

plug, proceed as follows:

1. Connect the wire coloured green and yel-

low to the terminal marked either with the

letter "E" or by the earth symbol

oured green and yellow.

2. Connect the wire coloured blue to the ter-

minal either marked with the letter "N" or

coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or col-

oured red.

4. Check that no cut, or stray strands of wire

is present and the cord clamp E is secure

over the outer sheath.

www.zanussi.com

Earth

Live

Neutral

or col-

5. Make sure the electricity supply voltage is

the same as that indicated on the appli-

ance rating plate.

6. Switch on the appliance.

The appliance is supplied with a 13 amp plug

fitted B. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA ap-

proved (BS 1362) fuse must be used.

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that it is disposed of safely.

Rear spacers

You can find the two spacers in the bag with

documentation.

Do these steps to install the spacers:

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

Levelling

When placing the appliance ensure that it

stands level. This can be achieved by two ad-

justable feet at the bottom in front.