Zanussi ZK 8 R Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Congelador Zanussi ZK 8 R. Zanussi ZK 8 R 16 páginas.

Imprimir página

WARNINGS

It is most important that this instruction book should be retained with the appliance for future refer-

ence. Should the appliance be sold or transferred to another owner, or should you move house and

leave the appliance, always ensure that the book is supplied with the appliance in order that the new

owner can be acquainted with the functioning of the appliance and the relevant warnings.

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock

(latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appli-

ance. This will prevent it from becoming a death-trap for a child.

This must be done before the appliance is built intoThese warnings are provided in the interest of

safety. You must read them carefully before installing or using the appliance.

General Safety

•

This appliance is designed to be operated by

adults. Children should not be allowed to tamper

with the controls or play with the product.

•

It is dangerous to alter the specifications or mod-

ify this product in any way.

•

Before any cleaning or maintenance work is car-

ried out, be sure to switch off and unplug the

appliance.

•

This appliance is heavy. Care should be taken

when moving it

•

ce lollies can cause frost burns if consumed

straight from the appliance.

Service/Repair

•

Any electrical work required to install this appli-

ance should be carried out by a qualified electri-

cian or competent person

•

This product should be serviced by an autho-

rized Service Centre, and only genuine spare

parts should be used.

•

Under no circumstances should you attempt to

repair the appliance yourself. Repairs carried out

by inexperienced persons may cause injury or

more serious malfunctioning. Refer to your local

Service Centre, and always

Use

•

The domestic refrigerators and freezers are

designed to be used specifically for the storage

of edible foodstuffs only.

•

Best performance is obtained with ambient tem-

perature between +18°C and +43°C (class T);

+18°C and +38°C (class ST); +16°C and +32°C

(class N); +10°C and +32°C (class SN). The

class of your appliance is shown on its rating

plate.

Warning: when the ambient temperature is not

included within the range indicated for the class

of this appliance, the following instructions must

be observed: when the ambient temperature

drops below the minimum level, the storage tem-

perature in the freezer compartment cannot be

guaranteed; therefore it is advisable to use the

food stored as soon as possible.

•

Frozen food must not be re-frozen once it has

been thawed out.

•

Manufacturers' storage recommendations should

be strictly adhered to. Refer to relevant instruc-

tions.

•

The inner lining of the appliance consists of chan-

nels through which the refrigerant passes. If these

should be punctured this would damage the appli-

ance beyond repair and cause food loss. DO NOT

USE SHARP INSTRUMENTS to scrape off frost or

ice. Frost may be removed by using the scraper

provided. Under no circumstances should solid ice

be forced off the liner. Solid ice should be allowed

to thaw when defrosting the appliance. See defrost

instructions.

•

Do not place carbonated or fizzy drinks in the

freezer as it creates pressure on the container,

which may cause it to explode, resulting in damage

to the appliance.

Installation

•

There are working parts in this product which heat

up. Always ensure that there is adequate ventila-

tion as a failure to do this will result in component

failure and possible food loss. See installation

instructions.

•

Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cord is damaged, it must

be replaced by a special cord or assembly avail-

able from the manufacturer or its service agent.

•

Parts which heat up should not be exposed.

Wherever possible the back of the product should

be against a wall.

•

If the appliance has been transported horizontally,

it is possible that the oil contained in the compres-

sor flows in the refrigerant circuit. It is advisable to

wait at least two hours before connecting the appli-

ance to allow the oil to flow back in the compres-

sor.