Zanussi ZVF 190 R Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Congelador Zanussi ZVF 190 R. Zanussi ZVF 190 R 11 páginas.

Door reversal

Unplug the appliance before all operations.

To reverse the door, proceed as follows:

dismantle the lower hinge (3), pin (1) and the screw

(2);

slide the door out from pin (5), unscrew the pin and

reposition on the opposite side;

unscrew the left front foot and reposition on the

opposite side;

unscrew the two screws which mask the holes for

ﬁxing the hinge from the left front side;

reassemble the door;

reassemble the lower hinge (turning it 180 ), the pin

and the screw on the opposite side, as shown in the

ﬁgure;

dismantle the handle (6) and reassemble it on the

opposite side.

The holes that are not used are to be masked with the

plastic plugs removed.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the cabinet.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not ﬁt perfectly to the cabinet. In that

case, wait for the natural ﬁtting of the gasket or

accelerate this process by heating up the part involved

with a normal hairdrier.

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

D193

D299

Fig. 3

Fig. 3a