Zanussi ZYNN8FW0 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Congelador Zanussi ZYNN8FW0. Zanussi ZYNN8FW0 17 páginas.

Imprimir página

SWITCHING OFF

1. Turn the Temperature regulator to the "O"

position.

The Power indicator light will switch off.

2. Remove the plug from the wall socket.

TEMPERATURE REGULATION

The temperature is regulated automatically.

However, you can set a temperature inside the

appliance yourself.

Choose the setting keeping in mind that the

temperature inside the appliance depends on:

•

room temperature,

•

frequency of opening the door,

•

quantity of food stored,

•

appliance location.

A medium setting is generally the most suitable

one.

To operate the appliance:

1. Turn the temperature regulator clockwise to

obtain a lower temperature inside the

appliance.

2. Turn the temperature regulator

counterclockwise to obtain a higher

temperature inside the appliance.

FASTFREEZE FUNCTION

The FastFreeze is used to perform pre-freezing and

fast freezing in sequence of Freezer compartment.

This function accelerates the freezing of fresh food

DAILY USE

FREEZING FRESH FOOD

The freezer compartment is suitable for freezing

fresh food and storing frozen and deep-frozen food

for a long time.

To freeze fresh food activate the FastFreeze

function at least 24 hours before placing the food

to be frozen in the freezer compartment.

Store the fresh food evenly distributed in the third

and fourth compartment or drawer from the top.

The maximum amount of food that can be frozen

without adding other fresh food during 24 hours is

specified on the rating plate (a label located inside

the appliance).

When the freezing process is complete, the

appliance automatically returns to the previous

temperature setting (see "FastFreeze Function").

and, at the same time, protects foodstuffs already

stored from undesirable warming.

To freeze fresh food activate the

FastFreeze function at least 24 hours

before placing the food to complete

pre-freezing.

To switch on the function:

1. Press the FastFreeze button for 2-3 seconds to

activate the FastFreeze function. The

FastFreeze light will switch on.

2. Place the food in the freezing compartments

and keep the FastFreeze function switched on

for further 24 hours. Refer to "Freezing fresh

food" section.

This function stops automatically after

52 hours. It is possible to deactivate

the function at any time by pressing

the FastFreeze switch for 2-3

seconds.

HIGH TEMPERATURE ALARM

When there is a temperature increase in the freezer

compartment (e.g. due to a power failure) the Alarm

light is blinking and sound is on.

The sound can be switched off at any time by

pressing the Alarm reset switch.

When normal conditions are restored the Alarm

light stops blinking and the sound turns off

automatically.

STORAGE OF FROZEN FOOD

When activating an appliance for the first time or

after a period out of use, before putting the

products in the compartment let the appliance run

at least 3 hours with the FastFreeze function

switched on.

The freezer drawers ensure that it is quick and easy

to find the food package you want. If large

quantities of food are to be stored, remove all

drawers, except for the bottom drawer which needs

to be in place to provide good air circulation.

Keep the food no closer than 15 mm from the door.