Directed Directechs DB3 Manual de instalación - Página 18

Imprimir página

Directed Directechs DB3 Manual de instalación

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are

3 possible ways you can send commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly

on your factory remote.

Vehicle takeover with regular key

Close the vehicle doors, hood and trunk, then send the

Remote Start command to start the vehicle.*

Send the Unlock command on the factory or aftermarket

remote.*

Enter the vehicle, insert your key in the ignition barrel, and

turn it to the ON position.

Depress the brake pedal, put the car in gear and drive

off.

* Icon and remote appearance may differ depending on the model purchased.

403.HK3 3.04 2016 Hyundai Santa Fe Sport

Press

Remote

Press Unlock

on either

Key OUT

Key IN

START

Enter

vehicle

Ready

to drive

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear in

Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

It is safe to leave the engine running and exit the vehicle

with the factory remote in hand.

Note: We recommend that you always lock the doors of

14:36

your vehicle when leaving it unattended.

* Icon and remote appearance may differ depending on the model purchased.

14:36

List of available commands

Key IN

Note that the information below is for many Viper, Clifford, Python, Avital, Automate, Autostart

START

and AstroStart models. Icons and commands may differ depending on the model and options

purchased. Refer to your authorized installation center for more specific information.

Button(s)

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).

* Icon and remote appearance may differ depending on the model purchased.

Put

gear in

Park

Parking lights

Press Remote

flash x1

Start button*

14:36

Exit vehicle

with remote