Zanussi ZHC 927 Manual de instalación, uso y mantenimiento - Página 10

Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Campana de ventilación Zanussi ZHC 927. Zanussi ZHC 927 13 páginas.

CLEANING METAL SELF-SUPPORTING GREASE FILTERS

The filters must be cleaned when led S4 starts to

flash or at least once every two months of opera-

tion, or more frequently with heavy usage, and can

be washed in a dishwasher.

Resetting the alarm signal

• Press button R, using a sharp object (for example

the tip of a pencil).

• The Alarm indicator led S4 will go out.

Cleaning the ﬁlters

• Remove the filters one at a time by pushing

them towards the back of the group and pulling

down at the same time.

• Wash the filters, taking care not to bend them.

Allow them to dry before refitting.

• When refitting the filters, make sure that the

handle is visible on the outside.

This filter is not washable and cannot be regener-

ated, and must be replaced when led S5 starts to

flash, or at least once every four months of opera-

tion. The Alarm is only signalled when the Recircu-

lation motor is turned on.

Resetting the alarm signal

• Press button R, using a sharp object (for example

the tip of a pencil).

• The Alarm indicator led S5 will go out.

Replacing the filter

• Remove the metal grease filters

• Remove the saturated activated carbon filter by

releasing the fixing hooks

• Fit the new filter by hooking it into its housing

• Replace the metal grease filters.

Grease filters