Zanussi ZHC72X Instrucciones de uso e instalación - Página 12

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación Zanussi ZHC72X. Zanussi ZHC72X 16 páginas. Zanussi instructrion manual ventilation hood zhc72x

Zanussi ZHC72X Instrucciones de uso e instalación
INSTALLATION INSTRUCTIONS
Fix the telescopic part (A) with some
10
adhesive tape (W) so that it cannot slip out
(fig. 9).
Rest the lower part of the hood against the
wall and mark the position of the two holes
C (fig. 9) on the wall with a marking pen.
Remove the lower part and drill two holes
in the marked position and insert the screw
anchors.
Fix the lower part by using the 6 screws
supplied (fig. 9).
Remove the adhesive tape from the
telescopic part and pull it downwards until
it touches the hob.
Make the electrical connection.
9
IMPORTANT:
Check the position of screw M (fig.10).
Ducting – The screw(s) must be
completely screwed in.
Filtering – The screw(s) must not be
screwed in, so that the air sucked into the
hood can escape through the top vents.