Zanussi Gas cooker Manual del usuario - Página 23

Navegue en línea o descargue pdf Manual del usuario para Cocinas Zanussi Gas cooker. Zanussi Gas cooker 28 páginas. Gas cookers

To adjust the minimum level, turn the knob to the

position of minimum flame, remove the knob (Fig. 31)

and: in case of conversion from natural gas to LPG,

tightly screw the by-pass pin of the cocks;

when converting from LPG to natural gas unscrew

about one-fourth turn by-pass pin, until a regular small

flame is reached.

Reassemble the parts following the same procedure

backards.

Check that, turning quickly the knob from the maximum

position to the minimum one, the burner doesn't go out.

To replace the oven nozzle, follow this procedure:

remove the bottom of the oven, unscrew screw 1 (fig.

32) and take the oven burner out.

With a socket spanner 7 unscrew and remove the

nozzle, situated in the bottom of the oven, replacing it

with the proper one (see Table 2); reassemble the

burner following the same procedure backwards.

In ranges with thermostat, after setting the oven on

maximum temperature with closed door for about 10

minutes, turn the knob of the thermostat on 140,

remove the knob and:

in case of conversion from natural gas to LPG,

tightly screw the by-pass pin of thermostat (fig. 31);

converting from LPG to natural gas, then, unscrew

the by-pass pin, until a regular small flame is

reached.

ADJUSTMENT INSTRUCTIONS FOR THE

BY-PASS PIN OF THE OVEN BURNER

THERMOSTAT

In the models equipped with rond head by-pass pin,

operate as follows to adjust such a device:

take out the knobs;

remove the frontal;

adjust xith a thin screwdriver, see figure 33;

finally check that turning quickly the tap from

maximum position to minimum position, the burner

doesn't switch off.

Fig. 31

Fig. 32

Fig. 33